New Page 1

Note:
All frames are built in house to ensure quality control.
All frames are new and improved with Cycle X Style!

If you do NOT see something you like, or you would like something different, contact us! (715) 356-7346

The Boxer Frame

BB
These bobber style frames have always been a favorite look of ours. They have a 50's, 60's, 70's look. These no frills looking bikes are quick steering and feature a "Don't mess with me look."

Features:

- Hard Tails.
- Stock front geometry ( use stock front ends ) (save money)
- 6 inches of ground clearance. (plenty of room for MAC drag pipes)
We mocked up a bike so you can see what a bike could look like.

Install a Streetfighter motor in your boxer and go look for a fight!
Honda 750 SOHC (69-78)-Also fits 79-82 DOHC.
Temporarily Out Of Stock

FR-001 $799.95 Call to Order (715) 356-7346

The Pro-Street Frame

The World Famous Pro-Street frame gets better (new version)

Features:

-4 inches in the back bone and zero up for a low and long stance.
-34 degrees.
-Stock length front ends can be used with our Honda neck cups.
-HD front ends can be used with Harley neck cups.

These frames are very universal, allowing stock or fatter tires (give a call for fitments)

FR-002 $799.95 Call to Order (715) 356-7346
NOW IN STOCK

New Emgo Viper Fairing and Replacement Shields

Cafe Racer Faring Kit with Headlight Unit & Mounting Brackets!

Cafe Style Fairing with Gloss Black High Impact Plastic with Tinted Windscreen & Universal Mounting Hardware (included).
Chrome 7" Round Headlight Unit includes Bucket, Replaceable Lens & H4 Bulb. Has 10x1.25mm Mounting Holes Built on each side with opening at Bottom Rear of Unit for Wiring Harness.
Chrome Headlight Brackets (pair) mount Headlight (and turn signals if desired) to Fork Tubes 33-36mm tubes
Faring Dimensions:

Viper Sport & Café Fairing Specs:

Head Light Opening 185mm

Head Light Lip Inward 25mm

Top Width 385mm

Top Length 300mm

Bottom Width 380mm

Bottom Length 150mm

Height Top : Bottom 320mm

Windshield Height 150mm

Windshield Length 375mm
# SHIELD-001 $ 68.00

Question: "Uma, what do you think of our Cycle X fork tubes?"
Answer: "I LOVE a good 12 inch over tube!"

New fork tubes by Cycle X are made with industrial hard chrome and fit 73-78 Honda cb750's. 35mm diameter. Cycle X fork seals meet or exceed OEM specifications ( sold separately ) Cycle X dust boots or gator boots will make your bike look nice and fresh. ( sold separately ) Note: Over size fork tubes will need spacers on top of springs to compensate extended lengths. Limited Time Offer! Get a free set of fork seals with any fork tube order! ~ Now there's no excuse NOT to get new tubes!
-1 Tube Set (22 13/16 inches) FR-006 $149.00 Note: This length is considered STD for 73-76	-2 Tube Set (21 13/16 inches) FR-005 $149.00	-3 Tube Set (20 13/16 inches) FR-105 $149.00 Temporarily Out of Stock
Standard Tube Set (23 13/16 inches) FR-007 $149.00 Note: This length is considered STD for 77-78 Temporarily Out Of Stock	+4 Tube Set (27 13/16 inches) FR-008 $149.00 Temporarily Out Of Stock	+6 Tube Set (29 13/16 inches) FR-009 $159.00
+8 Tube Set (31 13/16 inches) FR-010 $159.00	+10 Tube Set (33 13/16 inches) FR-011 $159.00	+12 Tube Set (35 13/16 inches) $159.00 # FR-012 Temporarily Out of Stock

Dust Boots

FR-013 $9.95 Pair

Fork Tube Caps

FR-015A $53.95

Cycle X Gator Fork Boots
Our gator boots are different because they do not mount to your head light ears like OEM. Our boots mount to your lower sliders and your fork tube.
This will eliminate the need for OEM head light ears for a super clean and 60's, 70's look. Super elastic.

FR-014 $19.95 Pair

Honda SOHC Fork Seals (73-78) We have tried every fork seal made. These fork seals are the best quality and price.
Tech tip: After your fork seals are installed, lube the top of the seal with your favorite lubricant. This will give your fork seals extended life and better fork action.

FR-015 $6.99 Set

CB750 Progressive Fork Springs
Fork springs lead a hard life, especially when they are 30 plus years old.
Progressive springs offer a soft initial spring rate for a plush ride. Progressively wound design provides increased resistance to bottoming as spring compresses. Improve handling while retaining OEM geometry. Fits 69-78.

FR-036 $79.95

Black on Chrome Shorty Shocks

Measures: 11.4"

Black Spring, Chrome Body

FR-019 $79.95 (pair)

Chrome on Black Shorty Shocks

Measures: 11.4"

Chrome Spring, Black Body

FR-020 $79.95 (pair)

All Chrome Shorty Shocks

Measures: 11.4"

Chrome Spring, Chrome Body

FR-021 $79.95 (pair)

Black on Black Shorty Shocks

Measures: 11.4"

Black Spring, Black Body

FR-050 $79.95 (pair)

Back to Top ▲
Cycle X Triple Trees
These triple trees are designed to replace the stock trees for a cleaner and more universal handle bar mounting option.
They are designed to use your stock hardware and bearings.

Complete triple tree set fits 69-78 Honda cb750's.
Top tree fits 69-76.

Triple Trees

FEATURES ARE:

Premium, fully CNC machined and pocketed top and bottom clamp components, are manufactured from 2" x 5" (51 x 126 MM) thick, Aerospace grade materials.

Super strong 1 1/2" (38 MM) thick, 2 alloy bolts per side, pinch bolt fork tube clamp area.

7075 Aluminum steering stem for lightweight and superior strength, with included billet top steering nut.

Built in lower brake hydraulic fluid manifold, that's recessed beneath the lower clamp section with AN-3 fittings, for a really clean brake line set-up that can be used as a single line or double brake line installation. (a plug for the right side for single disc applications is included if desired)

4 Tapped steering damper mounting holes are provided beneath the lower clamp if needed. (M8 x 1.25MM thd. shown above)

2 Tapped instrument cluster mounting pads are provided on the front of the top clamp for user application if needed. (M6 x 1MM thd. shown above)

Fork tube dia. is 35MM, (stock) and the spread of the tubes is the stock factory dimension. (NOTE: conversion of the stock frame neck ball bearings, to tapered roller bearings is highly recommended for the best installation and performance of this unit.)

All aluminum surfaces are anodized for durability and corrosion protection, and all fasteners are heat treated alloy socket head cap screws,(Allen)

FR-032 $379.00

Cycle X Single Gauge Bracket
Polished alloy bracket.
LED turn signal, neutral and oil pressure lights with wiring instructions.
Stainless hardware.
Nice and sturdy mounting and construction.

MD-003 $169.00 Bracket/Lights Only
$209.00 w/Speedo

Air Fork Caps with Gauges
(Honda cb750)
You may not need these,
But they look cool...

FR-030 Complete kit $99.00

Cycle X Battery Box
A simple but great edition to any project. Comfortable Batter Fit 7.0" inches x 6.0" inches x 4.0" inches.

FR-044 $46.95
Temporarily out of Stock

Neck Cups Honda SOHC
Boxer frames are the most universal frames in the industry. We can use HD neck bearing cups for Springer's or wide glides. We can also use these special neck bearing cups to use stock Honda front ends.
Note: If you have a custom frame from the 70's that had a Springer, you can switch neck cups and now use a Honda front end.
Note: Neck needs to be 5 5/8's long... 1 5/16 ID measurement for the cups to work (raw metal).

FR-033 $59.95

Honda CB750 Neck Bearings
Safety is just as important as looks. Ever drive a bike with bad neck bearings? Not fun! This tapered neck bearing set will give you support that OEM ball bearings never had. With people changing neck angles, this bearing set is even more important!
Fits 1969-1978 SOHC

FR-034 $39.95

Harley Neck Cups and Bearings

Neck cups and bearings for HD front ends.

FR-035 $89.95

Spiked Rear Axel (20mm)
20mm axels are used on many Asian bikes. The Asians never thought of building an axel this cool. 11 inches long in the middle. 3 inch spikes (watch your shins). They also come with extra thick washers just in case the 11 inch bearing surface is to long.

FR-042 $89.95
Temporarily Out of Stock

Spiked Axel
5/8 Diameter, 9.5" inches total length
13.5" inches with the spikes on.

FR-043 $32.95
Temporarily Out of Stock

               Honda DOHC Neck Bearings
                         Fits 1979-1982
          # FR-034B             $ 39.95

Risers In Black or Chrome
FR-031 $69.95

Cycle X Oil Tank
These are our favorite oil tanks for the Boxer and Pro-frames.
Comes in 5 or 6 inch diameter.

OL-008 $139.00

Frame Splice Kit
Meant for stock framed Honda's.
These splice kits are designed to cut the lower back-bone frame tubes to make top-end maintenance easy.
You will not need to remove the motor to do top ends.
Cut lower tubes and weld in our splice kits.

FR-040 $129.95

Natural Position Foot Pegs
These combination foot peg motor mount nuts will make your easy.
Simply, shorten your lower rear motor mount bolt and re-thread one side of the bolt with the provided die and handle.
Install the foot pegs and tighten (done).

Raw metal pegs (paint, chrome as needed).
Die and die handle.

FR-028 $99.95

Universal Custom Kickstand
FR-038 $74.95

Rear Chain Tensioner
Ever watch a bike chain while its driving down the road? Ever notice those chain marks on the bottom of your expensive oil tank? Ever get tired of adjusting your chain and there is a gap in your fender location? We love these super high level chain tensioners because they will eliminate chain whip, chain noise, vibration, reduce chain and sprocket wear. Sealed bearings and chrome plates.
Note: Because choppers have longer chains, these chain tensioners, we feel, are a MUST! Highly recommended on our Boxer and
Pro Street (cry baby) Frames

FR-037 $79.95

HD Factory Tubing
This frame tubing was purchased from the HD factory many years ago. This is the same tubing used to make all the HD frames for years. DOM seamless.

Available in 1 1/8, 1 1/4 and 1 1/2 diameters

1 1/8" $20.00 per 6 feet
1 1/4" $25.00 per 6 feet
1 1/2 " $30.00 per 6 feet

FR-045

It is the sole and exclusive responsibility of the purchaser to determine the suitability of any part, product or work for his or her use.
The purchaser shall assume all legal, personal injury risk and liability and all other obligations, duties and risks therewith. There is no warranty on High Performance motors.

HOME	Sales Page	Apparel & Accessories	Chain and Sprocket	Chemicals	Chrome and Chrome Exchange
Cliff Anderson Custom Helmets	Cliff Anderson Custom Tanks	Cycle X Drag Bike	Cycle X Racing	DOHC Products	Electrical and Ignition
Engine Parts	Exhaust	Fenders	Filters	Frame and Front End	Fuel and Tanks
Handlebars and Accessories	Harley Twin Carb System & Stuff	High Performance Engine Coating	Honda Carb Systems	Honda CB 500 / 550 Products	Honda Hot Rod Motors
Levers and Cables	Lighting	Machine Work & Services	Motor/Chassis Dress Up	Mufflers and Accessories	Oil Related
Pawn Shop	Tech Tips	Trikes/Trike Frames	Wheels And Accessories	Our Customers	About Cycle X/Contact Us

HOME	Sales Page	Apparel & Accessories	Chain and Sprocket	Chemicals	Chrome and Chrome Exchange
Cliff Anderson Custom Helmets	Cliff Anderson Custom Tanks	Cycle X Drag Bike	Cycle X Racing	DOHC Products	Electrical and Ignition
Engine Parts	Exhaust	Fenders	Filters	Frame and Front End	Fuel and Tanks
Handlebars and Accessories	Harley Twin Carb System & Stuff	High Performance Engine Coating	Honda Carb Systems	Honda CB 500 / 550 Products	Honda Hot Rod Motors
Levers and Cables	Lighting	Machine Work & Services	Motor/Chassis Dress Up	Mufflers and Accessories	Oil Related
Pawn Shop	Tech Tips	Trikes/Trike Frames	Wheels And Accessories	Our Customers	About Cycle X/Contact Us