Exhaust Page
Before you purchase any Honda cb750 exhaust system, make sure you know what
pipes you need.
Pictured above is the early style mounting system Honda used ( we call this spigot
style ).
Due to the fact people make changes we insist you look at what pipes
you will need.
So look at the picture and call if you have further questions.
| Cycle
X ......... 4 into 2 into 1 .........
High Performance Exhaust System 
 
 Question: What will I need to make a good, strong running Honda CB ? Answer: Well, you will need a solid motor, powerful ignition system, proper jetting and a good exhaust system. Question: Where do I get a good exhaust system ? Answer: Nowhere, until now. Introducing the Cycle X 4-2-1 high-performance exhaust system. Almost all high-performance sport bikes have versions of 4 into 2 into 1 exhaust systems. This technology has been around for years and some Honda road racers have experienced the benefits of this configuration. More horsepower and torque throughout the RPM range. Proper inside diameter pipes. Proper exhaust pipe length. Removable baffle ( drill the rivet ) Black coated ( road race legal) And my favorite, Lotsa ground clearance compared to a 4 into 1 system. 69 thru 78. Remove exhaust spigots on early models. Cycle X new, exclusive product in stock now!
|
4 into 1
side-winder exhaust These photo's were taken for the "how to build a cheap chopper" book. We selected this side-winder exhaust system because it looks mean and sounds meaner. ( unbaffled) Fits sohc and dohc Honda's. Vance & Hines brand. Note: We have taken a photo of a stock Honda with the Sidewinder installed. These systems were designed for Honda DOHC 's, but we use them on SOHC's. Give a call, we will tell you how to mount them. Sale Price $229.00 |
MAC
DRAG PIPES
|
|
| EARLY MOUNT SPIGOT STYLE # EX-880 $ 269.00 |
LATE MOUNT NON-SPIGOT
STYLE # EX-881 $259.00 OUT OF STOCK |
Cycle X drag pipes
..........................
remember when ????????????Remember the days when chrome drag bikes were available for Honda cb 500 and 550's. Well................. we have contracted the original manufacture to make these pipes again. Very limited supply. Fits Honda cb500 and cb550's (71-78 ) WAS: $ 279.00 SUPER SALE: $239.99 # EX-1245 |
Special Combo $$$ Sale
High level baffles for MAC drag pipes:So, your neighbors are complaining about noise and the cops are giving you tickets. Here are your options: You could install those cheap baffles that were made with a can opener or you can install our "glass packed" 8 inch long high quality baffles. 8 inches long. Glass packed, for proper back pressure without sacrificing sound. $ 72.00 set of four. # EX-4444 |
|
|
SET OF 4 OF 1-5/8 FOR EARLY MODEL SPIGOT STYLE OUT OF STOCK 
|
SET OF 4 OF 1-3/8 FOR LATE MODEL NON-SPIGOT STYLE |
EXHAUST PIPE REDUCERS: These handy exhaust pipe reducers will help to mount the cool mufflers you have just found. They will allow you to go from 1 1/2 to 1 3/4 in various stages. $ 15.95 each # EX-902 |
  Honda cb 750 cHROME Exhaust spigots These new exhaust spigots are for Honda 750's. We like using new spigots on our fighter motors because they look nice and they seal better ( No exhaust seepage ). SOLD AS A SET OF 4. $ 139.00 # EX-909 |
 SMOOTH EXHAUST CLAMPS: Some people like the smooth look. 1 5/8 inch diameter. 3/4 inch wide. Sold as a set of 4. $ 19.00 # EX-865 |
Chrome Allen bolts for your exhaust spigots: Easier to work with and maybe someone will notice your finely detailed efforts. $ 14.99 per set of 8 # EX-904 |
 SUPER FINNED EXHAUST CLAMPS: Some people think these exhaust clamps look stock. We took a photo of some stock exhaust clamps next to some super finned clamps. One Of A Kind! Set of four $ 175.00 Set |
