Honda CB750
77-78 F2, F3 5mm Conversion Kit
(Cycle X Exclusive Product)
This complete 5mm racing conversion kit
has been used by many of the top race teams for years.
Kit includes:
Light weight intake valves - Light weight exhaust valves - Intake guides and seals
-Exhaust guides and seals - Keepers and lash caps
- Titanium retainers
-Chrome silicon springs
- H.T. steel base washers and extra shims
- Instructions
This kit retails for $1,199.95
ENV-018
Your Cycle X Price:
$1,149.95
Cycle X Race Team Approved
Call or
email for ordering/availability.
|
|
(77-78)
Honda CB750 F2, F3 Valve Spring and Retainer Combo
These Cycle X, Kibblewhite valve springs are the
favorite around here and with many pros worldwide. They
are used exclusively when high-lift cams require valve
sinking for valve to valve clearances. The reason these
springs are used is they will not require piles of
spring shims to get desired pressures.
So, stock valve spring installed height (1.455ish)
spring pressures with Cycle X, Kibblewhite ENV-009
springs are:
85lbs (no shims)
90lbs (.015 shim)
105lbs (.060 shim)
75lbs with .030 sunken valves (K & F models)
Caution:
Honda
CB750 77-78 K's and especially F2's have the potential
of the keepers pulling through the top spring retainers
and dropping the valve into the motor. Many people have
felt this heartbreak for the past 30+ years. Honda's
later model spring retainers are stamped steel, combined
with a steep keeper angle, has only been addressed by
complete spring kits costing hundreds of dollars, until
now.
We have
been working with Kibblewhite and have developed these
top retainers to cure this problem once and for all at a
reduced cost. Heat is a
problem in the F2 valve tranes, these new lightweight
top spring retainers feature 8 holes on the top of the
retainer. The purpose for these holes is to allow oil to
drip down the springs to help with heat dispersion. Keep
in mind, oil lubricates, picks up heat and carries it
away to coolers and such. People in NASCAR use the same
technique and it helps keep the valves well lubricated
for longer life. These retainers are made from heat
treated carbon steel for durability and strength. 11.25
grams per retainer!
ENV-011 Combo -
$270.00
|
|
F2
Retainer Set Only
We have
been working with Kibblewhite and have developed these
top retainers to cure this problem once and for all at a
reduced cost. Heat is a
problem in the F2 valve tranes, these new lightweight
top spring retainers feature 8 holes on the top of the
retainer. The purpose for these holes is to allow oil to
drip down the springs to help with heat dispersion. Keep
in mind, oil lubricates, picks up heat and carries it
away to coolers and such. People in NASCAR use the same
technique and it helps keep the valves well lubricated
for longer life. These retainers are made from heat
treated carbon steel for durability and strength. 11.25
grams per retainer!
# ENV-F2R $ 179.00
|
|
Budget High
Performance F2, F3 Spring and Top Retainer Combo
This high
performance combo kit is similar to above, but a budget
version. This kit includes ENV-008 and ENV-011.
Kit
includes:
(8) .060 shims
(16) .015 shims
ENV-013
$238.00
|
|
Kibblewhite F2/F3 Exhaust Valves & Intake Valves-Set of 8
Kibblewhite manufactured
exhaust valves received ours and Kibblewhite's full attention
because the exhaust valves and guides are the biggest problem. These
specially designed exhaust valves have great flow characteristics
and combined with Kibblewhite's proven black diamond process makes
these valves the best money can buy. 4 Intakes and 4 Exhausts
$ 245.00 # F2-0010
|
High Lift Valve Guides
These
valve guides are .100 shorter (top side) to accommodate big boy
camshafts.
By the way:
Our cast iron valve guides are the best for stock or racing
applications. (Bronze wears rapidly on Honda CB750's)
ENV-OHL
$129.00 per set
|
A 3.99% customer service
charge is applied to all phone orders.
If ordering via phone,
please also provide the part # of any products you are interested in for faster
and more accurate service.
If you encounter a (rare)
broken button as you're trying to add parts to your cart (going to PayPal
summary instead of your cart or not opening PayPal at all) or anything else of
concern, please call us to report it. We'll try to have it fixed for your
convenience within the next 5-10 minutes. Afterwards, refresh the page and try
again.
It is the sole and
exclusive responsibility of the purchaser to determine the suitability of any
part, product or work for his or her use.
The purchaser shall assume all legal, personal injury risk and liability and all
other obligations, duties and risks therewith.
There is no warranty on High Performance products.
Click
to go back to our home page
Cycle
X Global Headquarters
6246 US
Hwy 51 South
Hazelhurst,
WI 54531
Phone:
715-356-7346
Email:
hotrodcyclex@gmail.com