F2 VALVE SET FIX-EM-UPPER PAGE


GO BACK TO HOME PAGE

 

 

 

F2 Head Super Rebuild Kit (Version #1)
Stock OEM upgrade.

Studies show that this set up is the best for reducing wear and prolonging life in your F2 valve train. With our new light weight drilled retainers that allow oil to drip down the springs and valves to help reduce heat and improve all around lubrication, longer cast iron guides for added valve support, and our super flow valves makes this kit far superior over OEM Honda parts and other kits that are available on the market.

Kit includes:
(8) Cast Iron Guides
(4) KibblewhiteIntake Valves
(4) Kibblewhite Exhaust Valves
(8) New Light Weight Retainers
(8) Valve Seals

ENV-F2RH     $ 529.95
CALL OR EMAIL TO ORDER

 

 

 

 

 

 

 

F2 Head Super Rebuild Kit (Version #2)
Stock or mild performance upgrade.

Studies show that this set up is the best for reducing wear and prolonging life in your F2 valve train. With our new Cycle X retainers that replace the faulty stock retainers, high performance spring kit, longer cast iron guides for added valve support, and our super flow valves makes this kit far superior over OEM Honda parts and other kits that are available on the market.
This kit can be used as an upgrade from the stock OEM parts or a mild performance choice.

Note: Spring tensions, valve to valve starting points with larger camshafts and other basic information is in the spring and camshaft section.

Note: We do not use or recommend any form of bronze, Amco 45, Nichol bronze or Manganese bronze in Honda CB750 racing or stock cylinder heads. (They do not last)
 

Kit includes:
(8) Cast Iron Guides
(4) Kibblewhite Intake Valves
(4) KibblewhiteExhaust Valves
(8) New Cycle X Retainers
(8) Valve Seals and "O" rings
Stock or mild performance valve springs

ENV-F2RC     $598.95
CALL OR EMAIL TO ORDER

 

 

 

 

 

F2 Head Super Rebuild Kit (Version #4)
Bee-Hive.
The highest level.

Same as all the other versions, but with our Bee-hive valve spring kit.

Kit includes:
(8) Cast Iron Guides (High lift)
(4) Super Flow F2 Intake Valves
(4) Super Flow F2 Exhaust Valves
Bee-Hive valve spring kit with Titanium top retainers.
(8) Valve Seals

 

ENV-F2B     $489.95

 

 

 

 


 

Honda CB750 5mm F2 (77-78) Conversion Kit
Cycle X Race Team Approved

This complete 5mm racing conversion kit has been used by many of the top race teams for years.

Kit includes:
- Lightweight intake valves
- Lightweight exhaust valves
- Intake guides and seals
- Exhaust guides and seals
- Keepers and lash caps
- Titanium retainers
-Chrome silicon springs
- H.T. steel base washers and extra shims
- Instructions

This kit retails for $1299.95

ENV-018     Your Cycle X Price: $1049.95

 

 

 

 

HIGHEST LEVEL KIT


 

 

 

77-78 Supersport Racing Top End Git-Kit
 The Highest Level !


Pistons:

Cycle X and Wiseco have teamed up to offer state of the art strutted, billet and race coated 77-78 F2/F3 piston sets. These 1.00mm over piston sets will be race legal in all formula vintage motorcycle road races and feature a compression ratio approaching the 11 to 1 ratio (depending on your milled head and cylinder, gasket selection and combustion chamber mods). Lightest pistons in the industry for your go-fast project.

62mm. (AHRMA race legal)
142 grams (Freakishly lightweight)
35 gram tool steal wrist pins.


5mm Bee-hive valve kit:

Cycle X Race Team Approved

This complete 5mm racing conversion kit has been used by many of the top race teams for years.

Kit includes:
- Lightweight intake valves
- Lightweight exhaust valves
- Intake guides and seals
- Exhaust guides and seals
- Keepers and lash caps
- Titanium retainers
-Chrome silicon springs
- H.T. steel base washers and extra shims
- Instructions

 

Camshaft:

This Git-kit for the 77-78 Honda CB750 F2/F3 Supersports is perfect for the Cycle X CX-7 camshaft (a few other cams will work nicely also).

Note: Be sure to tell your machine shop or cylinder head builder to sink the intake & exhaust valves .015 to .020 thousandths to get valve to valve clearances in the .050 range with this CX-7 cam.
 
 

ENP-VRP     $1,899.95 (Save $200)

Call or e-mail for availability.


 

 

HOME

Refurbished

Machine Work & Services

Close Out

Honda Hot Rod Motors

Pistons

Gaskets

Git Kits

Cush Drives & Chain Wheels

Crankshafts & Connecting Rods

Valve Train

Transmissions

Camshafts

Honda CB750 F2 Parts

Engine Chains

Clutches

Cylinder Studs

Carb Systems

Wheels & Accessories

Polishing, Chroming, & Black Chroming

Miscellaneous Parts

Rocker Arms

Tech Tips

Apparel & Accessories

Cam Chain / Primary Chain Tensioner

A 3.99% customer service charge is applied to all phone orders.

If ordering via phone, please also provide the part # of any products you are interested in for faster and more accurate service.

If you encounter a (rare) broken button as you're trying to add parts to your cart (going to PayPal summary instead of your cart or not opening PayPal at all) or anything else of concern, please call us to report it. We'll try to have it fixed for your convenience within the next 5-10 minutes. Afterwards, refresh the page and try again.

It is the sole and exclusive responsibility of the purchaser to determine the suitability of any part, product or work for his or her use.
The purchaser shall assume all legal, personal injury risk and liability and all other obligations, duties and risks therewith.
There is no warranty on High Performance products.

Click to go back to our home page

Cycle X Global Headquarters

6246 US Hwy 51 South

Hazelhurst, WI 54531

Phone: 715-356-7346

Email: hotrodcyclex@gmail.com