British Page

BACK TO INDEX PAGE  

                                                                                                                                                                                                                                                                  

                                                           


 Introducing Our British Web Page.
Although this British section will be always be under construction , we will give this section our full attention by
 adding parts and developing new products on a regular basis. Pictured in the middle is our former 3 time world 
record holding Triumph drag bike from the 70's era.    

                                       Handlebars

		HANDLE BAR REDUCERS:    If you have cool 1 inch handle bar risers these       reducers will allow you to run 7/8's bars.             $ 8.99                  # HB-922
7/8 CHROME DRAG BARS Width 28", Rise 3.84", Pullback 0, Center 5.6"      NON-DIMPLED, NON-KNURLED.            $ 22.99                 # HB- 919	7/8 CHROME CLUBMAN BARS Used heavily in the 70's and still look great!  Width 28", Rise -0.8", Pullback 6", Center 4.8"           $ 24.00                    # HB-918	BLACK 7/8 SUPERBIKE  BARS:               BRAND NEW! 7/8 BARS.              WIDTH 29.2", RISE 3.04",            PULLBACK 3", CENTER 4"             $ 20.99                   # HB-894
7/8 BLACK DAYTONA BARS                   WIDTH  29.2, RISE 5.36,              PULLBACK 3', CENTER 4.4"                $ 22.99          #HB-899	7/8 INCH BROOMSTICK BARS    THESE BARS WILL GIVE YOU A COOL  60'S LOOK. 32 INCHES WIDE.              CHROME, NON-DIMPLED                   $ 25.00            #HB773	1 INCH BROOMSTICK BARS THESE BARS WILL GIVE YOU A COOL       60'S LOOK. 32 INCHES WIDE.              CHROME, NON-DIMPLED.               $ 29.00             # HB-000
1INCH BLACK CLUBMANS          BLACK SATIN POWDER FINISH           27.5" wide, 6.5" center, 4.75" rise                     $ 49.00            # HB-123	1INCH CHROME CLUBMANS                    CHOME FINISH           27.5" wide, 6.5" center, 4.75" rise               $ 49.00            # HB-124	7/8 INCH BLACK CLUBMANS       27.5" WIDE, 6.5" CENTER, RISE              $ 28.00             # HB-0000
14 INCH CHROME APEHANGERS     14 " HIGH, 32" WIDE, 6" CENTER                $ 45.95             # HB-777	16 INCH CHROME APEHANGERS        16 " HIGH, 32" WIDE, 6" CENTER                $ 49.95           # HB-778	18 INCH CHROME APEHANGERS        18 " HIGH, 32" WIDE, 6" CENTER                   $ 54.95              # HB-779
16 INCH BLACK APEHANGERS        16 " Length, 32" Wide, 6 " Center.                 $ 45.95        # HB-0098                            OUT OF STOCK!	18 INCH BLACK APEHANGERS        18 " Length, 32" Wide, 6 " Center               $ 54.95                 # HB-0099	CYCLE X T-BARS These 7/8's handle bars are straight from the 60's and 70's era.  They will complete your retro project and you will not see them everywhere because we own them exclusively! Length 27 1/2", Center 5", Pullback 3", Rise 7"                                                        $ 49.95                        # HB-894                         OUT OF STOCK!
CYCLE X CHROME BEACH BARS Cycle X  Beach bars are cool because nobody else has them. Ultra Wide!!! Approx dimensions:  Width 40" , Center 13", Rise 5"              $ 44.95                   # HB-776 O         OUT OF STOCK!	CYCLE X BLACK BEACH BARS Cycle X  Beach bars are cool because nobody else has them. Ultra Wide!!! Approx dimen.  Width  40" , Center 13", Rise 5"          $ 44.95                   # HB-775	BASIC BLACK DRAG BARS    NEW 24 1/2 INCH BLACK DRAG BARS.              NON-DIMPLED , KNULED.                $ 17.00            # HB 774

                    
Classic 60's, 70's mufflers. 
18 1/2 inches long.
Fits 1 3/4 pipes.
Reducers are included to gradually step down to 1 1/2 pipes.
Brackets and clamps are included.
Left photo shows straight mufflers. Right photo shows upsweep.

$ 79.00 per pair
 Straight # EX-4401                Upswept # EX-4402
                                             

  High out-put charging system.
Now that you have the Cycle X carb system ( best jetting )
Now that you have the Cycle X power arc ignition ( the best, period ) 
You might want to consider the Cycle X high out-put charging system.

This system features 16 amp's to keep up with modern halogen headlights.
Kit includes:
Rotor, stator and regulator.

$ 248.00                          CALL TO ORDER

            Triumph chrome valve covers:
                                                                         These custom valve covers ( from the 60's) fit 63-72 Triumph twins.
                                                                         Set of four   $ 39.00              # BRT-099

Triumph  " HIGH OUTPUT" Stator and rotor combo ( you need this):
British charging systems have always been a little weak. 
Now-a-days we are using Halogen bulbs and high output ignition systems. This 10 amp Stator and rotor combo will do the trick.
$ 248.00                  BRT-000             CALL TO ORDER
 

    60's style bar end turn signals.

These Cycle X turn signals were based on 60's BMW's.
Front and rear lens. This means you will not need to run turn signals in the rear of your custom project.
Die cast construction for durability.
1 3/4 diameter ( nice and small )
Fits into 7/8's handle bars.
60's, 70's retro look.                                      $ 34.00 per pair               # LG-080

                                             NEW PRODUCT - VINTAGE, RETRO CHROME TAIL LIGHTS!  

                                                                                     
                                            We have never seen these tail lights in catalogs before. Very limited supply!
                                                                        $ 37.95                         # LG-098
                                                                           

                                   NEW  PRODUCT - VINTAGE, RETRO BLACK TAIL LIGHTS!
 
                                                            
                    EXCLUSIVE CYCLE X PRODUCT! NO WHERE ELSE TO BE FOUND!               
                                                                                                                                 

TRIUMPH carburetor systems:
These carburetor systems feature  prejetted MIKUNI carburetors and our retro air filters.
Kit contains:
                     Throttle assembly, cable, adaptors, 2 prejetted mikuni carbs, super cool retro air filters.
                    Please specify year, make and model
                     Complete Kit  $ 359.00
Note:
Our jetting package is second to none !!!!!!!!!!!!!
Call To Order.

Triumph
         BSA
         Norton
         High power ignition..... Simply the best

Programmable features :
Spark timing placement in 1degree increments.
Placement of 1-3 Sparks / Compress Stroke.
2 Digital / Analog sensor inputs.
4 independent timing curves.
Tach output 1-8 cylinders.
Coil saturation control ( dwell )
Curve fall back.
Re-programmable via PLC cable.
Precision voltage reference. 
Static timing light. 
One coil pack for your 4 cylinder.
Capable of 80,000 volts of out-put.
Extremely fast rise time.
Sparks 3 times every compression stroke and continues through-out the RPM range. ( full voltage output ) Other multiple spark ignitions on the market do not multi-spark after 3 thousand RPM.
High amperage output.
Quick disconnect connector. 
Fires at low voltage for easy starting.
Coils feature section bobbin construction ( no paper )
Instructions and support as necessary  
The best ignition  available for Triumph, BSA and Nortons

$ 275.00
Call To Order.